Machines at work
From container unloading to machines at work
A machinery shipment is opened and unloaded before clips show a chaff cutter, pellet mill and other equipment being handled.
From container unloading to machines at workA machinery shipment is opened and unloaded before clips show a chaff cutter, pellet mill and other equipment being handled.
9Z-8T tractor PTO chaff cutter at workMaize stalks feed into a LUCTORC 9Z-8T while a tractor powers the cutter through its PTO.
LUCTORC tractor loaded for transportA red LUCTORC tractor is lifted and guided into a truck for transport at the factory.
LUC-750 wrapping a bale on the factory floorA finished bale wrapped in film and rolled clear of the LUC-750's table, filmed on the factory floor.
Diesel chaff cutter working on a Kenyan farmCustomer footage: a diesel chaff cutter chopping maize stalks and grass where there is no mains power.
Bale wrapping on the LUCTORC lineA pressed bale is turned and film-wrapped on the machine's table until it is completely sealed.
Inside the baler: drive and controlsSide cover open on the chain drive, hydraulic ram and wiring, with the control cabinet under test.
From hopper to wrapped baleForage goes in at the hopper and comes out a film-sealed bale that rolls down the discharge ramp.
One bale, from press to sealedThe pressed bale turns on the wrapping table, takes its film and is wheeled away ready to store.
LUC-90 baling silage in the fieldA loader tips silage into the hopper and the machine turns out sealed white bales beside it.
Sliced baler built for a Kenyan customerA customer's sliced baler on test: grass and silage pressed into tight bales, then wrapped and sealed.
Baling and wrapping on the factory lineChopped forage feeds the baler, the finished bale turns on the table and is sealed in green film.
