LUC-55 Diesel
The only diesel machine in the range. An 18 hp engine runs it where there is no mains supply, at 60–65 bales an hour. See product info about LUC-55 Diesel.
LUCTORC silage balers, chaff cutters and feed pellet machines
Aina za bidhaa
Mashine na vifaa vinavyotumika
Machines for cutting, baling, sealing and pelleting, plus the film and net they run on.
Zinakotengenezwa
Kiwanda chetu
Assembled, finished and tested at our own plant before export crating.
Funga chochote
Mashine moja, malisho ya aina nyingi
Maize silage, alfalfa, grass, straw and corn stalk all seal on the same machine. Not sure yours does? Tell us what you cut.
Maize silageWhole-crop maize, chopped and ensiled 
AlfalfaLucerne cut for protein-rich forage 
GrassFresh and wilted pasture grass 
Straw and corn stalkDry crop residue, cut before baling - Your material?Check if it is balable
Bidhaa maalum
Nine from across the range
Four lines, nine products. The rest of every line is on its own page.
LUC-55 Diesel
| Ukubwa wa boli | 550 × 520 mm |
| Uzito wa boli | 60–100 kg |
| Nguvu | Injini ya dizeli, hp 18 |
| Uwezo | 7–8 t/h |
| Uzito mashine | 900 kg |
LUC-70
| Ukubwa wa boli | 70 × 70 cm |
| Uzito wa boli | 160–200 kg |
| Nguvu | 11 + 0.75 + 0.37 kW |
| Uwezo | tani 60–100/siku |
| Uzito mashine | 1.1 t |
LUC-750S
| Ukubwa wa boli | Ø 700 × 700 mm |
| Uzito wa boli | 200–240 kg |
| Nguvu | 27 kW |
| Uwezo | tani 120–160/siku |
| Uzito mashine | 1.6 t |
LUC-90
| Ukubwa wa boli | 90 × 90 cm |
| Uzito wa boli | 300–500 kg |
| Nguvu | 39 kW |
| Uwezo | tani 200/siku |
| Uzito mashine | Kwa ombi |
9Z-4.5T
| Uwezo | Up to 4.5 t/h |
| Nguvu ya mota | 5.5–7.5 kW |
| Injini ya dizeli | 15–18 hp |
| Uzito mashine | 300–330 kg |
9Z-10T
| Uwezo | Up to 10 t/h |
| Nguvu ya mota | 18.5–22 kW |
| Injini ya dizeli | hp 30 au zaidi |
| Uzito mashine | 850–930 kg |
Press-Roller Series
| Uzalishaji | 100–3,000 kg/h |
| Nguvu | 4–75 kW |
| Kasi ya mota | 970–1,450 mzunguko/dak |
| Mifano | 200 – 500 |
LUC-SWF-2518
| Upana | 25 cm |
| Urefu | 1,800 m |
| Rangi | Kijani |
LUC-BNW-5220
| Upana | 52 cm |
| Urefu | 2,000 m |
| Rangi | Nyeupe |
Matumizi
Complete workflow, complete solution
From standing crop to sealed bale: cut it to length, press it dense, then wrap and seal it.
1Cut the forageGrass, straw and corn stalk are cut to a set length, which is what lets the material compress properly.
2Press the baleThe baler compresses the cut forage into a dense bale, driving out the air that spoils feed in storage.
3Wrap and sealStretch film wraps the finished bale and seals it, so it can be stacked outdoors and opened one at a time.
Kwa nini uchague LUCTORC
Nguvu
Drive lines from 4 kW to 75 kW electric, with diesel and tractor PTO alternatives across the range.
Uimara
Thickened bases and enlarged gearboxes. Machines weigh 900 kg to 1,600 kg and above.
Ufanisi
Baler wrappers reach up to 200 tonnes a day; the pellet series 100 to 3,000 kg/h.
Uaminifu
Inclined press rollers wear the mould evenly, which is what keeps intervals long.
Uko tayari kuboresha shughuli zako?
Tujenge pamoja mustakabali imara
Tell us the material, the daily tonnage and the power available on site. You get a model recommendation, the full specification and a quotation.
