LUC-55 Diesel
The only diesel machine in the range. An 18 hp engine runs it where there is no mains supply, at 60–65 bales an hour. See product info about LUC-55 Diesel.
LUCTORC silage balers, chaff cutters and feed pellet machines
Product lines
Machines and the packaging they run on
Machines for cutting, baling, sealing and pelleting, plus the film and net they run on.
Where they are built
Our production hall
Assembled, finished and tested at our own plant before export crating.
Bale anything
One baler, many kinds of forage
Maize silage, alfalfa, grass, straw and corn stalk all seal on the same machine. Not sure yours does? Tell us what you cut.
Maize silageWhole-crop maize, chopped and ensiled 
AlfalfaLucerne cut for protein-rich forage 
GrassFresh and wilted pasture grass 
Straw and corn stalkDry crop residue, cut before baling - Your material?Check if it is balable
Featured products
Nine from across the range
Four lines, nine products. The rest of every line is on its own page.
LUC-55 Diesel
| Bale size | 550 × 520 mm |
| Bale weight | 60–100 kg |
| Installed power | Diesel engine, 18 hp |
| Output | 7–8 t/h |
| Machine weight | 900 kg |
LUC-70
| Bale size | 70 × 70 cm |
| Bale weight | 160–200 kg |
| Installed power | 11 + 0.75 + 0.37 kW |
| Output | 60–100 t/day |
| Machine weight | 1.1 t |
LUC-750S
| Bale size | Dia. 700 × 700 mm |
| Bale weight | 200–240 kg |
| Installed power | 27 kW |
| Output | 120–160 t/day |
| Machine weight | 1.6 t |
LUC-90
| Bale size | 90 × 90 cm |
| Bale weight | 300–500 kg |
| Installed power | 39 kW |
| Output | 200 t/day |
| Machine weight | On request |
9Z-4.5T
| Output | Up to 4.5 t/h |
| Motor power | 5.5–7.5 kW |
| Diesel engine | 15–18 hp |
| Machine weight | 300–330 kg |
9Z-10T
| Output | Up to 10 t/h |
| Motor power | 18.5–22 kW |
| Diesel engine | 30 hp or higher |
| Machine weight | 850–930 kg |
Press-Roller Series
| Production | 100–3,000 kg/h |
| Installed power | 4–75 kW |
| Motor speed | 970–1,450 rpm |
| Models | 200 – 500 |
LUC-SWF-2518
| Width | 25 cm |
| Roll length | 1,800 m |
| Colour | Green |
LUC-BNW-5220
| Width | 52 cm |
| Roll length | 2,000 m |
| Colour | White |
Applications
Complete workflow, complete solution
From standing crop to sealed bale: cut it to length, press it dense, then wrap and seal it.
1Cut the forageGrass, straw and corn stalk are cut to a set length, which is what lets the material compress properly.
2Press the baleThe baler compresses the cut forage into a dense bale, driving out the air that spoils feed in storage.
3Wrap and sealStretch film wraps the finished bale and seals it, so it can be stacked outdoors and opened one at a time.
Why choose LUCTORC
Power
Drive lines from 4 kW to 75 kW electric, with diesel and tractor PTO alternatives across the range.
Durability
Thickened bases and enlarged gearboxes. Machines weigh 900 kg to 1,600 kg and above.
Efficiency
Baler wrappers reach up to 200 tonnes a day; the pellet series 100 to 3,000 kg/h.
Reliability
Inclined press rollers wear the mould evenly, which is what keeps intervals long.
Ready to improve your operations?
Let's build a stronger future together
Tell us the material, the daily tonnage and the power available on site. You get a model recommendation, the full specification and a quotation.
