9Z-4.5T
电动DieselPTO
| Discharge | High discharge |
| 产量 | 最高 4.5 t/h |
| 电机功率 | 5.5–7.5 kW |
| 柴油发动机 | 15–18 hp |
| 整机重量 | 300–330 kg |
High discharge
Low discharge
The 9Z models run at approximately 1,400 rpm on a 380 V supply; where a weight is given as a range, the lower figure is the electric machine and the upper figure the multi-drive version, the 9Z-8T is 25–30 hp recommended and the 9Z-10T is typically fitted with 35 hp. The 3.8 to 15 t/h ratings are offered with an electric motor — single phase up to 7 t/h, three phase above it — or a diesel engine, and their dimensions are printed in the notation supplied. Voltage, engine brand, exact weight, dimensions and units are confirmed against the ordered configuration at quotation.
配置
切碎、揉丝以及驱动方式
减速箱、驱动方式和功能在下单时选定。
减速箱
单减速箱或双减速箱，视机型和您的作业产能而定。
驱动方式
电动机、柴油/电动双动力、拖拉机动力输出轴，或三者集于一机。
功能
仅切碎，或切碎加揉丝以获得更均匀的饲料。
This applies to the 9Z models: not every combination is offered on every one — the 9Z-4.5T has no three-drive version, the 9Z-8T is dual-gearbox only, and on the 9Z-10T diesel comes with the three-drive version rather than as a dual-power option. The 3.8 to 15 t/h ratings are simpler: each is supplied either with an electric motor or with a diesel engine. Each model page lists exactly how that machine can be ordered.
应用领域
这些机器的用途
为牛、羊、山羊、马和家禽切碎草料、干草、秸秆和作物茎秆。
青贮打捆与包膜
新鲜草料被压成草捆并用薄膜密封。密封后的草捆可在户外堆放，逐个开启。
草料与秸秆切碎
牧草、秸秆和玉米秆在打捆或饲喂前被切成固定长度，这样物料才能被真正压实。
饲料颗粒生产
粉碎草料和配合饲料被压制成颗粒，供牛、羊、家禽和鱼类食用。
肉牛、羊与奶牛养殖场
需要备足饲料度过旱季的养殖场，以及为其供货的饲料生产商。
常见问题
The questions buyers ask first about this line. If yours is not here, ask it directly.
What throughput do LUCTORC chaff cutters offer?
Ten models cutting grass, straw and corn stalk at 3.8 to 15 tonnes an hour.
How are the chaff cutters driven?
By electric motor, diesel engine or tractor PTO. The 9Z series can combine all three on one machine; the smaller ratings are single phase up to 7 t/h and three phase above it, and the 9Z series runs on a 380 V supply.
Can the chaff cutter also knead the feed?
Yes. The 9Z models are offered as chaff cutting alone, or chaff cutting with kneading for a more uniform feed. Each model page lists exactly how that machine can be ordered.
What power do the chaff cutters need?
From 3-4 kW on the 3.8 t/h machine up to 22 kW on the 9Z-10T, and every rating is also offered with a diesel engine.
Do you publish prices, and can you ship worldwide?
Prices are quoted on inquiry; machines ship worldwide direct from the factory, with packing, container quantity and lead time stated in the quotation.
